Install Guide: Cali Raised LED Tacoma Stealth Bumper

Install Guide: Cali Raised LED Tacoma Stealth Bumper

The Tacoma Stealth Bumper from Cali Raised LED is a versatile upgrade for your Toyota Tacoma, offering durability, a sleek design, and improved off-road capability. This detailed guide will walk you through the installation process, ensuring your new bumper is securely and correctly fitted.

Pro Tip: You can purchase the Tacoma Stealth Bumper at OffRoadUSA and enjoy exclusive discounts and deals.

Tools You Will Need

  • Socket wrench set (10mm, 12mm, and 14mm sockets recommended)

  • Torque wrench

  • Flathead and Phillips screwdrivers

  • Trim removal tool

  • Pry bar

  • Tape measure

  • Power drill (if modifications are required)

  • Safety glasses and gloves

Pre-Installation Preparation

  1. Park Safely: Park your Tacoma on a flat surface. Turn off the engine, engage the parking brake, and disconnect the negative battery terminal for safety.

  2. Inspect the Bumper: Unbox your Cali Raised Tacoma Stealth Bumper and ensure all components, including bolts, brackets, and accessories, are included and undamaged.

Step 1: Remove the Factory Bumper

  1. Disconnect Electrical Components:

    • Unplug the wiring harnesses for the factory fog lights, sensors, and any additional accessories attached to the stock bumper.

  2. Remove Bolts and Clips:

    • Use a socket wrench to remove the bolts securing the stock bumper. These are typically located under the bumper and near the wheel wells.

    • Remove any plastic clips and screws using a flathead screwdriver or trim removal tool.

  3. Detach the Factory Bumper:

    • Carefully pull the factory bumper away from the vehicle. Use a pry bar if necessary, but take care not to damage the paint or other components.

    • Set the factory bumper aside in a safe location.

Step 2: Prepare for Installation

  1. Clean Mounting Points:

    • Clean the frame and mounting areas where the new bumper will be installed. This ensures a secure fit and prevents rust.

  2. Install Additional Accessories (Optional):

    • If your Stealth Bumper includes mounts for lighting or a winch, install these components now according to the manufacturer’s instructions.

Step 3: Install the Tacoma Stealth Bumper

  1. Position the Bumper:

    • With the help of a friend or a jack, align the Tacoma Stealth Bumper with the mounting points on the vehicle frame.

    • Ensure the bumper is centered and level using a tape measure.

  2. Secure the Bumper:

    • Attach the bumper using the bolts and brackets provided in the installation kit. Tighten the bolts loosely at first to allow for adjustments.

    • Once the bumper is properly aligned, tighten all bolts to the manufacturer’s recommended torque specifications using a torque wrench.

  3. Reconnect Electrical Components:

    • Reconnect the wiring harnesses for fog lights, sensors, and other accessories. Use electrical tape to secure any loose wires if necessary.

Step 4: Test the Installation

  1. Check Stability:

    • Ensure the bumper is securely attached and does not move or rattle.

  2. Test Electrical Components:

    • Turn on your fog lights and any additional accessories to confirm proper functionality.

  3. Inspect Alignment:

    • Check the alignment of the bumper and adjust if necessary.

Step 5: Finalize the Installation

  1. Reinstall Trim Pieces:

    • Reattach any trim pieces or skid plates removed during the process.

  2. Tighten Bolts:

    • Double-check all bolts to ensure they are tightened to the correct torque specifications.

Post-Installation Tips

  • Clean the Bumper: Use a microfiber cloth to wipe down the bumper and remove any fingerprints or debris.

  • Check Periodically: Inspect the bolts and wiring periodically to ensure they remain secure.

Why Choose the Tacoma Stealth Bumper by Cali Raised LED?

The Cali Raised Tacoma Stealth Bumper is built for adventure, offering:

  • Durable construction to withstand tough off-road conditions.

  • Sleek design that enhances the look of your Tacoma.

  • Compatibility with lighting and winch systems for added functionality.

Upgrade Today: Purchase the Tacoma Stealth Bumper from OffRoadUSA to transform your Tacoma and take advantage of special discounts.

By following this guide, you can confidently install your new bumper and hit the trails with a rugged, capable setup. Happy off-roading!

Back to blog